IMS2, IMS3, IMS4, IMS5 Operator Manual
4806-00017
Revision F
17
Section 5.2: Engine Running for Battery
The battery icons listed on this page are commonly
displayed on the operator screen. The corresponding
character will appear to the left of the voltage on the
Primary Information Screen (see Section 12.1 for details).
• 0: This icon indicates the engine is running to charge
Battery 0 (the chassis lead-acid battery).
• 1: This icon indicates the engine is running to charge
Battery 1 (the 12V lithium-iron battery pack).
• 2: This icon indicates the engine is running to charge
Battery 2 (the hybrid lithium-iron battery packs).
• I: This icon indicates the engine is running because the
hybrid battery pack voltage is ≤ 10V. The engine will run for
a period of time determined by the system settings.
• F: This icon indicates the engine is running because an
individual battery cell is low during ePTO mode (if a hybrid
electric motor is equipped). The engine will run for a
period of time determined by the system settings.
• V: This icon indicates the engine is running because an
individual battery cell is low. The engine will run for a
period of time determined by the system settings.
• S: This icon indicates the engine is running because the
IMS battery packs have reached a state of charge (SOC)
below the SOC charge set point. The engine will run for a
period of time determined by the system settings.
• P: This icon indicates the engine is running because the
hybrid battery pack voltage is < 11.2V in parallel or <
22.4V in series. The engine will run for a period of time
determined by the system settings.
• X: This icon indicates an issue that does not correspond to
one of the aforementioned scenarios has occurred. If this
icon appears, it can be removed only by restarting the IMS
(see Section 3.7 for more information). If the problem
persists, contact your service department.
