IMS2, IMS3, IMS4, IMS5 Operator Manual
4806-00017
Revision F
9
Section 4: Climate Control
Section 4.1: Air Conditioning (If Equipped)
Air conditioning is activated by setting the chassis HVAC
controls to the cool side and turning the blower fan on.
•
The climate control field on the operator screen will
change to read “COOL”, the arrow below the field will turn
blue, and cool air will begin to blow from the vents within
a few seconds.
•
The snowflake icon will appear on the left side of the
screen almost immediately.
NOTICE: If the engine starts due to an A/C fault/error, the
snowflake icon will flash (see Section 11.2 for details). If the
engine starts for any other condition, the snowflake icon will
disappear.
•
Cool air will continue to blow from the vents until the
operator turns the blower fan off, turns the HVAC controls
to heat, or disables air conditioning using the operator
screen (see Page 10 for more information), or if the
minimum temperature set point (default 60°F) is reached.
