Zeroplus LAP-F1 Скачать руководство пользователя страница 88

Страница: 88 / 140

LAP-F1 Logic Analyzer

User Guide v1.6

| www.zeroplus.com.tw

Show files

horizontally

Display the two files horizontally; unchecked by default.

Synchronize

navigation

Synchronize panning across the two files. This option is unchecked

by default and only available if ”Show files horizontally” is checked.

Highlight

differences

Mark the different waveforms with red wavy lines, the default is

not selected.

Apply

Make changes effective.

Hide/Unhide

Results

Hide/Unhide the Results area.

Select Channels

Select the channels to be contrasted. At least one must be chosen;

by default all are selected.

Execute

Perform the Files Comparison. Note that this function needs to

pre-process a temporary file; see note in chapter 4.6.

Statistics

Results

Display the status of channels contrast, PASS means the data in the

channel is identical for the two files and FAIL means the data is

different.

# of differences

The column shows the number of differences between the two files

for each channel.

Navigation

Go to the previous difference between the two files.

Go to the next difference between the two files.

Table 4:28 Files Comparison dialog box description

The reference file and the contrast file are displayed horizontally in the waveform

area. New, orange, wavy traces

~~~~~

(one for each channel) in the lower

window show where the two files differ. The orange waves marking the differences

can be discerned in the lower waveform area in Figure 4-37.

Содержание LAP-F1













































































































































Результаты поиска

Содержание LAP-F1

Отзывы:

Похожие инструкции для LAP-F1

Бренды по названию

Популярные бренды

Zeroplus LAP-F1, Руководство пользователя

Результаты поиска

Содержание LAP-F1

Отзывы:

Похожие инструкции для LAP-F1

Бренды по названию

Популярные бренды