3
2021-12-02
Quantum RTLS Universal Device Manual
Certification and Compliance
The radio used in this device has been certified for use according to Federal Communications
Commission (FCC), Industry Canada (IC) and
Conformitè Europëenne
(CE) rules and regulations.
FCC Regulatory Statement
Model(s): QTM-UAR10, Model QTM-UMR10, QTM-SMR10
FCC ID: 2AX6LQTMUR10
Caution: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—
Consult the dealer or an experienced radio/TV technician for help.
This equipment can be installed and operated with a minimum distance 5 millimeters between
the radiator and user’s body. This equipment has been evaluated to meet general RF exposure
requirement at 5 millimeters distance.
