SWITCH 6 USER GUIDE
Zero88 Lighting Ltd, Usk House, Llantarnam Park, Cwmbran, Gwent NP44 3HD, U.K
Tel: +44 (0) 1633 838088 (24hr Answer Phone) Fax: +44 (0) 1633 867880
73-877-00 Email:
IM7804Switch6ManualIssue1_3.doc
www.zero88.com
Page 1 of 4
To Remove The Cover:
Isolate and disconnect the Switch 6 from the mains supply.
The mains supply terminals are located under the top cover.
Remove the four screws from the side end plates to lift off the cover.
Connecting The Mains:
The Switch 6 is supplied configured for three-phase operation. As shown in the diagram
below;
Single Pole Breakers
Neutral Disconnect Breakers
A linking bar (part 00-380-00) can be supplied to order, for single-phase operation
Mounting/Installation:
The Switch 6 has side brackets for mounting in a standard 19” rack/case.
Ventilation:
The Switch 6 is cooled by natural convection. In order to prevent the unit from overheating,
DO NOT block the vents located on either side of the unit.
WARNING!
DO NOT REMOVE THE COVER WITHOUT FIRST
COMPLETLEY DISCONNECTING THE SWITCH 6 FROM THE
MAINS SUPPLY
