background image

Table Of Contents

TOC.2

Rear Shock Adjustment ...........................................4.17

Maintaining Your Motorcycle........................ 5.1

Maintaining Your Motorcycle ......................................5.1

Owner’s Responsibilities............................................5.1
Parts/Maintenance Items ...........................................5.1
Maintenance Schedule ..............................................5.2
Component Fasteners ...............................................5.5

Power Pack ...................................................................5.8

Power Pack................................................................5.8

General Maintenance ...................................................5.9

Brakes........................................................................5.9
Suspension ..............................................................5.12
Wheels And Tires.....................................................5.13
Tire Inflation .............................................................5.13
Drive Belt .................................................................5.14
Headlight Alignment.................................................5.16
Turn Signal Light Bulb Replacement .......................5.19
Brake/Tail LED Replacement...................................5.19
Running Light Bulb Replacement ............................5.20
Cleaning...................................................................5.21
Parking and Long Term Storage..............................5.22
Zero Motorcycles Accessories .................................5.22
Fuses .......................................................................5.22

Service Record ...........................................................5.25

Troubleshooting ............................................  6.1

Troubleshooting .......................................................... 6.1

Electric Motorcycle Precautions................................ 6.1
Troubleshooting Your Motorcycle ............................. 6.1
System Warning Indicator......................................... 6.2
General Troubleshooting .......................................... 6.5
Battery Management System.................................... 6.6
Cold and Hot Weather Considerations ................... 6.12
Safety Interlocks ..................................................... 6.14

Warranty and Customer Information...........  7.1

Limited Warranty Information .................................... 7.1

What Does This Limited Warranty Cover?................ 7.1
What Is The Coverage Period Of This Limited 
Warranty? ................................................................. 7.1
Who Does This Limited Warranty Cover?................. 7.2
What Is Not Covered By This Limited Warranty? ..... 7.2
What Other Limitations Or Disclaimers Apply To This 
Limited Warranty....................................................... 7.4
What Are Your Responsibilities As A Customer? ..... 7.5
What Will Zero Do Under This Limited Warranty? .... 7.5
How Do You Obtain Service Under This Limited 
Warranty? ................................................................. 7.6
Transfer Of Ownership And Warranty....................... 7.6

Customer Information ................................................. 7.7

Customer Assistance ................................................ 7.7
Reporting Safety Defects .......................................... 7.7

Содержание DS 2014

































































































































Отзывы: