4
May 21, 2019
Author: Rudi
Version: 1
Attention:
1. Note that the table is protected by a protective film, remove it before using the stove.
2. Lift the glass lid, make sure that the burners is correctly installed.
6 - TABLE BURNERS SAFETY VALVES
The stove has a safety valve on the table burners. The valve cuts off the gas supply if the flame
accidentally extinguishes. This device prevents the accumulation of gas in the environment,
preventing explosions and poisoning.
Ignition safety
The device must not be operated for more than 15 seconds. If after 15 seconds the burner does not
come on, stop the operation and wait at least 1 minute before attempting to ignite the burner again.
Safety of re-ignition after flame extinction
If the burner flame is accidentally extinguished, close the burner control and do not re-ignite for at
least 1 minute.
TABLE BURNERS IGNITING INSTRUCTIONS
Note:
light the match or lighter before turning the knob.
1. Raise the glass cover, make sure that the burner is installed correctly;
2. Press and hold the knob of the selected burner, turn it counterclockwise to the high
position. Ignite the selected burner using a burning match or lighter. Hold the knob pressed
for a further 10 seconds.
3. Now release the knob.
4. After ignition, adjust the flame according to your needs.
7
–
BURNER LIGHTING / USING THE OVEN
Note:
The stove has a safety valve in the oven. The valve cuts off the gas if the flame goes out accidentally.
This device prevents the buildup of gas in the oven, preventing explosions and poisonings.
Before using the oven, turn it on for about 15 minutes with the door open.
This process is important to eliminate oil odors and humidity of some components of the stove.
Note:
light the match or lighter before turning the knob.
1. Open the oven door.
2. Press and hold the oven knob, turn it counterclockwise to the high position. Ignite the
oven burner using a burning match or lighter. Hold the knob pressed for a further 10
seconds.
3. Now release the knob.
4. After ignition, adjust the flame according to your needs.
Ignition safety
The device must not be operated for more than 15 seconds. If after 15 seconds the burner does not
come on, stop the operation and wait at least 1 minute before attempting to ignite the burner again.
