Zero COMANDO 24, Руководство пользователя и настройка

Страница: 6 / 16

PG6
ZCOMV24 |CONTROL PANEL | COMANDO 24V
If activated between the LIMIT SWITCH positions the motion
of the gate is reversed for 2 seconds to free the obstacle im -
pact (moving the trimmer clockwise increases the current force
necessary to stop the gate motion). After the limit switch posi -
tions, if activated it will stop any motor motion.
Through the DIP 6, the double sense force can be applied for
the closing function instead of opening.
NOTE: CHECK THE IMPACT FORCE LIMITS AFTER SETTING. AN-
TI-CRUSHING FUNCTION DOES NOT AVOID ANY OBLIGATION
TO INSTALL THE SAFETY DEVICES RECOMMENDED BY SAFETY
REGULATIONS.
PROGRAMMING SAFETY EDGES FUNCTIONALITY
The control panel can accept wire safety edges. USE DIP 10 to
set function.
ON-BOARD MAGNETIC LIMIT SWITCH FUNCTION the control
unit is equipped with a CN2 connector to accommodate a ma-
gnetic limit switch module directly welded on control panel (
on
demand and just for Z01 model
).
BATTERY EMERGENCY FUNCTION (BLACK START):
The control board is equipped to operate in emergency with a
single 12v battery and with a battery recharging circuit (the
microprocessor realizes that it is in emergency and regulates
the safety, adapting it to the situation, up to 5 maneuvers with
a 1.2AH battery).
NOTE: If black start is activated the gates will move slowly (12V
supply) and will not have the flashing light blinking.
FORCE AND SENSITIVITY REGULATION (ANTI-CRUSHING)
The control board has 1 trimmer : TR11 - Allows the automation
sensitivity regulation (increases sensitivity by rotating it in the
clockwise direction);