ZERO-X swift+, Руководство пользователя

Страница: 12 / 28

10
4.4 INSTALLING ROTOR GUARDS
Installing the rotor guards is optional. Installing the rotor
guards will protect your rotor blades and motors against
bumps and light crashes.
1. To install the rotor guards please insert the rotor
guards pegs into the designated holes near the
motors on the Swift+'s arms and tighten the screw.
2. To remove the rotor guard, please unscrew the
screws and then press the middle part of rotor guard
first, then take the rotor guard out.
4.5 REMOTE CONTROL
1. Extend the arms of the remote control.
2. Remove the battery cover on the rear of the remote control by sliding it
downward.
3. Insert 2 x AAA batteries (AAA batteries not included) making sure that
they are in the orientation specified.
NOTE:
• The right arm of the controller is Power ON / OFF.
• By extending the arm lower, the controller will Power on make a beep
sound and the Power Indicator will turn ON.
• Closing the right controller arm will turn off the controller.
Battery Cover
2 x AAA 1.5V
Battery