8
*Fig 2.2.4
REMOTE CONTROL LCD SCREEN DIAGRAM
2
3
1
7
8
6
4
5
1.
Connection Strength
2.
Yaw Trim Balance
3.
Roll Trim Balance
4.
Pitch Trim Balance
5.
Acceleration
6.
Light Indicator
7.
Speed Mode
8.
Battery
3. SETTING UP YOUR ZERO-X NOVA
3.1 CHARGING THE BATTERY
PLEASE NOTE:
YOUR ZERO-X DRONE COMES WITH A CERTIFIED ZERO-X USB
AC CHARGING ADAPTER FOR 240v CHARGING OF YOUR DRONE BATTERY.
USE OF A NON ZERO-X CERTIFIED USB AC CHARGING ADAPTER WILL VOID
YOUR WARRANTY AND MAY DAMAGE BOTH YOUR BATTERY AND DRONE.
Fully unwind the included USB charging cable and plug the USB end into the
included Zero-X Certified USB AC charging adapter.
When connected to a charging source the LED light in the charger will glow
green. Connect the drone battery to the charging cable and the light will turn
red indicating charging is in process. The LED on the USB charging cable will
begin to glow green again once charging is complete. To keep the battery life
as long as possible avoid removing the battery from the charging cable before
charging is complete. If you have just finished flying your Nova drone, please
allow the battery to cool down for at least 30 minutes before recharging.
• When the Nova battery has finished charging it is advised that the battery is
removed from the charger as soon as possible. Overcharging will damage
the battery and effect the flight time.
• The Nova battery can take up to 90 minutes to fully charge. If the battery has
been on charge for any longer than 2 hours and the indicator on the charging
cable is not showing that the battery is charged please remove the battery
from the charger.
• When connecting the USB cable with the battery, make sure to follow the
guides on the battery connector as these are designed to only be inserted in
one direction. Forcing the connection in the incorrect direction, may cause
damage to the battery and charging cable.
• When flying the Nova, low battery will be indicated when the remote control
starts beeping and the lights on the Nova start flashing.
3.2 INSTALLING THE NOVA BATTERY
• Ensure that the Nova’s power switch
(Refer to Fig 2.2.2 on page 7 - number 8)
is
in the OFF position.
• Connect the battery cable to the Nova’s power cable ensure that the plug is
inserted in the correct orientation.
• Tuck the cable into the battery opening.
• Insert the fully charged battery with the charging wires facing outwards.
• Close the battery hatch making sure the battery drawer clicks into place.
