Capture the skies.
™
9_
To keep the battery life as long as possible avoid removing the battery
from the charging cable before charging is complete. If you have just
finished flying your Atlas drone, please allow the battery to cool down
for at least 30 minutes before recharging.
• When the Atlas battery has finished charging it is advised that the
battery is removed from the charger as soon as possible. Overcharging
will damage the battery and effect the flight time.
• The Atlas battery can take up to 90 minutes to fully charge. If the battery
has been on charge for any longer than 2 hours and the indicator on
the charging cable is not showing that the battery is charged, please
remove the battery from the charger.
• When connecting the USB cable with the battery, make sure to follow
the guides on the battery connector as these are designed to only
be inserted in one direction. Forcing the connection in the incorrect
direction, may cause damage to the battery and charging cable.
• When flying the Atlas, low battery will be indicated when the remote
control starts beeping and the lights on the Atlas start flashing.
3.1.1 INSTALLING THE FEET
Place the feet on the underside of the
Atlas in the position shown below. With
the feet in position use the included
screws to secure the feet in position.
3.1.2 INSTALLING THE ATLAS BATTERY
1.
Slide the fully charged battery into the battery slot on the rear of
the Atlas Drone with the battery sticker facing upward.
2.
Make sure the battery clicks into place and is secure.
3.
Hold the power button for two seconds to power up the Atlas
drone.
