Zeppelin Design Labs QUAVERATO MIDI MOD, Руководство по сборке

Страница: 12 / 21

12
10. 4-Pin Header: The short pins go through the board; the long pins point up (20). Make sure the
bottom of the header is flat against the circuit board. Tack one pin on the end of the row down
with solder while you hold the header in from the top (21). Once one pin has been tacked on,
you can solder the other pins in place (22). Remember to properly re-solder the “tacked on” pin.
20 21
22 23
The PCB is now done. Put it aside while we modify the chassis of the Quaverato.