Zeppelin Design Labs NOISETTE, Инструкция по сборке и эксплуатации

Страница: 7 / 30

7
Table 1: The Noisette Optical Theremin Bill of Materials (BOM)
Part # Description Notes Qty
CA-30-20 Speaker Grille Cover 1
ST-50-20 LDR Shield 2
PC-78-01 Noisette Circuit Board 1
ST-60-20 Nylon LED Standoff 1
DI-30-52 Green 5mm LED 2
SW-50-30 Pushbutton DPDT Switch 1
HD-40-40 1/8” TRS Audio Jack 1
HD-40-10 DC Power Jack 1
LS-30-32 1” 32 Ohm Loudspeaker 1
CP-10-08 Electrolytic Capacitor 16V 220uF C1, C2, C3 3
HE-20-01 Single Row Header 3 PIN 1
PT-30-30 Trim Potentiometer 100K 4
PT-10-10 9mm Potentiometer 100K 2
SN-30-10 LDR Sensor 3
CB-90-09 Heat Shrink Tubing (2mm x 42mm) 1
CB-90-15 Heat Shrink Tubing (5mm x 19mm) 1
HD-05-01 9V Battery Snap 1
ST-10-05 Hex Nylon Standoff M3.5x5 2
FA-60-38 Course Thread Screw Phillips Pan M2.5x5 2
FA-60-37 Machine Screw Phillips Pan M3x6 2
HE-60-02 Header Jumper 2 pin 1
SW-60-22 Red Switch Cap 1
CA-30-20 ST-50-20 PC-78-01 ST-60-20 DI-30-52
SW-50-30 HD-40-40 HD-40-10 LS-30-32 C1,C2,C3
HE-20-01 PT-30-30 PT-10-10 SN-30-10 CB-90-09