CONTROLS & FEATURES
9
CONTROLS: FILTER CHANGE INDICATOR (CARBON FILTERS)
Filters Change Reminder (Carbon, if fitted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of
Carbon Filters to purify exhaust and fumes from cooking, and re-circulates the air within the home.
These Carbon Filters are required to be replaced after every 120 hours of use. The
Filter Change
Reminder
function in the microprocessor needs to be switched on. The microprocessor in the
controls when set, will elapsed and count usage time and indicate by a flashing
when carbon
filter replacement is needed every 120 hrs.
Setting the Filter Change Reminder:
When Off, hold
for approx. 5 seconds.
The display will change from
(exhaust mode) to
, (purifying mode/
carbon filters used) this indicates that the
elapse timer function is switched on and
Carbon Filters are used.
Filter Replace Indicator:
When the display
starts flashing, the
Carbon Filters requires replacement after
120 hours of use.
Re-setting Function:
Once filters are replaced, with hood off,
press and hold
, the display will appear;
hold for approximately 5 seconds until
on display disappears
. The Filter
Change Reminder is now re-set and a new
120 hours elapse cycle is initiated.
hold 5 secs.
hold 5 secs.
display from <--> to <C>
display from <C> to < >
display <C> flashes
Set Mode
Change Filters
To Reset
