_
English
_
INSTALLATION
The appliance requires no installation it should be used solely as a portable appliance.
Portable appliances are not suitable for use in a bathroom.
OPERATION
1.
Turn the thermostat knob(right) in a clockwise direction until it reaches the
maximum setting.
2.
Summer service (ventilation only): turn the knob to the first setting.
3.
Heating at reduced power: turn the knob to setting I (1000W).
4.
Heating at full power: turn the knob to setting II (2000W).
5.
Switching off: turn the knob to setting 0.
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the right thermostat knob
(where included) in an anti-clockwise direction up to the point where the appliance
switches off and not beyond. The temperature fixed in this way will be automatically
regulated and kept at a constant level by the thermostat.
IMPORTANT SAFETY FEATURES
The heater is fitted with a safety device which will switch off the heater in case of
accidental overheating (e.g. obstruction of air intake and outlet grills, motor turning
slowly or not at all). To reset, disconnect the plug from the power for a few minutes,
remove the cause of overheating then plug the appliance in again.
Power switch
Thermostat
Indicator light
