Zephyr Willow AK8800AS, Инструкция по использованию, уходу и установке

Страница: 14 / 18

12
www.zephyronline.com
Maintenance –
Cleaning and Installing Filters
SURFACE MAINTENANCE:
clean periodically with hot soapy water and clean cotton cloth. do not use corrosive or abrasive detergent,
or steel wool/ scoring pads which will scratch and damage surface. do not use products containing chlorine
bleach or orange cleaners.
for heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.
Baffle Filters
The filters are intended to trap residue and grease from cooking. Although the filters should never need
replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry filters and re-install before
using hood.
Installing Baffle Filters (FIG 4):
1. Place filter into top groove of the power pack as shown and
pull towards front of power pack using handles.
2. Pivot back of filter upwards so it is angled in the power pack.
3. Push filter into channel on back of power pack to lock into place.
Replacing/Ordering Baffle Filters:
Hood Model: Part No. Qty. to Order
AK8800Ax 50210010 2
1
2
FIG 4
3
CAUTION: If this hood is installed in a salt water area (example: coast),
rinse all surfaces once a week with clear water (even if the hood is not used), and wipe dry completely.
!