14
Installation Instructions
⚫
To prevent damaging the door or door gasket, make sure the door is open at
least 90-degrees when pulling shelves out of the rail compartment.
⚫
The door opens to a maximum of 135 degrees with a door stop on the bottom
hinge preventing the door from opening further.
REMOVING THE WOODEN SHELVES:
1.
Open the door completely.
2.
Remove all the contents loaded on the shelf, if applicable.
3.
Pull the shelf towards yourself until it is fully extended outward.
4.
The shelf has plastic posts on both sides as indicated in the diagram below. While
facing the unit, press the plastic post on the right side down while pulling up on the
left plastic post.
5.
Evenly pull out the shelf from the track until it is completely removed from the inner
compartment.
Installation Instructions
REMOVING THE GLASS SHELVES:
1.
Open the door completely.
2.
Make sure the shelf is pushed back completely.
3.
Lift either the left or right side of the shelf to create a 45º angle from its original
position. Make sure not to lift either side of the shelf too hard as it may come in contact
with the inner wall mount.
4.
Pull the shelf outward until it is removed from the inner compartment. You may
encounter some resistance from the shelf guard rail.
