22
PRRD24C1AS, PRRD24C2AS, PRRD24C2AP Use, Care, and Installation Guide
R E F R I G E R ATO R
D R AW E R S
S I N G L E & D U A L Z O N E
P R E S R V ™
Operating Your Appliance
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
The refrigerator drawers have a temperature range from 33ºF-65ºF.
R
F
C
Quick Chill
R
F
C
Upper Zone
Lower Zone
Quick Chill
Preset Temperature Modes
Preset Temperature Modes
Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R “Compressor Running” light may illuminate to indicate the internal compressor is active.
After powering off, all button lights will stay off. Once any button is touched, the power button
will illuminate for five seconds.
Quick Chill
Press this button to activate the Quick Chill setting. The LED indicator will flash for 5 seconds,
and the temperature will be set to 33ºF. After 24 hours or if the Quick Chill button is pressed
again within those 5 seconds, the unit will return to its previous settings. To manually disable
Quick Chill, press the Quick Chill button twice; the first press will flash the LED indicator, and
the second press will disable the setting.
Interior Light
Press this button to cycle through the different internal light settings. The lights, display
window, and button colors will be affected. There are three light settings: Cloud White, Deep
Blue and Amber. To turn the lights off and on, press the hold the Interior Light button for three
seconds.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 33ºF is the lowest
available temperature on this unit.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time for three seconds to
switch the display temperature.
