Zephyr Monsoon DCBL AK9428AS, Инструкция по использованию, уходу и установке

Страница: 16 / 52

14
www.zephyronline.com
1
2
1
Installation –
Horizontal Ducting Preparation
12. Position blower inside liner body as shown by:
1) Rest the bottom horizontal ducting bracket
on the two support clips located on the interior
back wall of the liner.
2) Pivot top horizontal
ducting bracket to meet captive nuts on interior
back wall.
13. Secure blower to captive nuts on interior
EDFNZDOORIOLQHUZLWK´[´VFUHZV
VFUHZVIRUHDFKEUDFNHW6HDODQ\JDSV
DURXQGWKHNQRFNRXWSODWHE\XVLQJFHUWL¿HG
aluminum duct tape. Plug in blower molex
plug.
Horizontal ducting preparation is now
complete. Refer to Page 10, Step 5 to
complete installation.
10. (Rectangular Ducting) From inside the liner,
push 3-1/4” x 10” rectangular adaptor through
the back knock-out and secure to interior back
ZDOORIOLQHUZLWK0[PPVFUHZV
10. (Round Ducting) From inside the liner, push
8” round adaptor through the back knock-out
DQGVHFXUHWRLQWHULRUEDFNZDOORIOLQHUZLWK
M4 x 6mm screws.
11.
6HFXUHKRUL]RQWDOGXFWLQJEORZHUEUDFNHWV
WREORZHUDVVKRZQDERYHE\XVLQJWKH
3/16” x 3/8” screws previously removed from
3DJH6WHSVFUHZVIRUHDFKEUDFNHW