11
www.zephyronline.com
c.
Install a 8 exhaust duct and extend length =
S - 16
5/8
from ceiling. Duct shall be securely fastened to
joists. Do not use duct smaller than specified.
Attention: Duct installation is not required for non-
vented (recirculating) installations
d.
Install 1/2" electrical conduit in location marked on
template and extend length =
S - 11 1/8
from
ceiling.
e.
Install drywall around duct and conduit; then refinish
ceiling, leave enough clearance for easy installation
of chimney structure up to ceiling (see Installation
step 6).
f.
Tape Template in place and fit 4 screws on mounting
holes, do not tighten but leave a space of 1/2,
remove the template.
3.
Regulate chimney structure according dimension
S
(see step 1) and fix all assembly parts with 4 screws
to each bracket (32 screws in total), check structure
is well assembled.
5
Total 8 x 4 screws
4
1
2
3
6
7
8
FRONT
4.
Fix two brackets (one per side - with 2 screws
each), these will serve to fix duct covers.
Inst
allation
