Zephyr HPL-308, Инструкция по эксплуатации

Страница: 28 / 39

28
【
Figure 9
】
※
Note:
(1) If the link is failed, please exit the BPPLINK program.
Power off the HPL-208 BPM and power on again. Then
re-operate the BPPLINK program.
(2) “Disconnect” means to disconnect the link of present
Bluetooth.
4. Measurement
：
You can start to take measurements when Bluetooth Link
set up successfully. Please select “Measure” on main
function list (Figure 2), the mobile phone send the
command to HPL-208 BPM to measure blood pressure.
(Refer to Figure 10,11)
【
Figure 10
】 【
Figure 11
】