background image

4

Import

ant 

safety 

Notice

CAUTION:

FOR GENERAL VENTILATING USE ONLY.  DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS OR

VAPORS.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A.

Use this unit only in the manner intended by the manufacturer.  If you have questions, contact the manufacturer.

B.

Before servicing or cleaning the unit, switch power off at service panel and lock service panel disconnecting means

to prevent power from being switched on accidentally.  When the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such as a tag, to the service panel.

C.

Installation Work and Electrical Wiring Must Be Done By Qualified Person(s) In Accordance With All  Applicable Codes

& Standards,  Including  Fire-rated  Construction.

D.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning

equipment to prevent back- drafting.  Follow the heating equipment manufacturers guideline and safety standards

such as those published by the National Fire Protection Association (NFPA), the American Society for Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

E.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

F.

Ducted systems must always be vented to the outdoors.

CAUTION:

To reduce risk of fire and to properly exhaust air, be sure to duct air outside - do not vent exhaust air into spaces

within walls, ceilings, attics, crawl spaces, or garages.

WARNING

TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCT WORK.

Install  this  hood  in  accordance  with  all  requirements  specified.

WARNING

To Reduce The Risk Of  Fire Or  Electric Shock, Do Not Use This Hood With Any External Solid State Speed Control

Device.

WARNING

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE.

a)   Never leave surface units unattended at high settings.  Boilovers cause smoking and greasy spillovers that may

ignite.  Heat oils slowly on low or medium settings.

b) Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee,

Peppercorn  Beef  Flambe’).

c) Clean ventilating fans frequently.  Grease should not be allowed to accumulate on fan or filter.

d) Use proper pan size.  Always use cookware appropriate for the size of the surface element.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE

FOLLOWING

:

a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or other metal tray, then turn off the gas burner or the electric

element.  BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE

FIRE DEPARTMENT.

b) NEVER PICK UP A FLAMING PAN - you may be burned.

c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.

d) Use an extinguisher 

ONLY

 if:

1)

You know you have a class ABC extinguisher, and you already know how to operate it.

2)

The fire is small and contained in the area where it started.

3)

The fire department is being called.

4)

You can fight the fire with your back to an exit.

OPERATION

a. Always leave safety grills and filters in place. Without these components, operating blowers could catch onto hair,

fingers  and  loose  clothing.
The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,

maintenance and suitable use of the product. The manufacturer further declines all responsibility for injury due to

negligence and the warranty of the unit automatically expires due to improper maintenance.

* NOTE: Please check our website for revisions before doing any custom work.

READ AND SAVE THESE INSTRUCTIONS

Содержание elica EAT-E36ASX





















Отзывы: