Zephyr CACHE CCA-E30ASX Use, Инструкция по использованию, уходу и установке

Страница: 15 / 23

13
7. Place blower over round to rectangular adapter
as shown above.
8. Install blower with round to rectangular adapter
into hood.
Installation –
Internal Blower (Horizontal Ducting)
9. Mount blower brackets to hood using two
3/16” * 3/8” screws for each bracket. Screws
are included with internal blower.
10. Install rectangular starting collar to back of hood
using six M4*8 screws recently removed from
rectangular cap (three screws on each side).
Install four additional M4*8 screws in the top
and bottom middle of rectangular starting
collar. Check and verify inner adapter is fi rmly
secured.
11. Connect 9 pin male connector from blower to 9
pin female connector on control board box.