•
GREEN / YELLOW wire: Grounding, corresponding to the symbol Connect the wires to the fan and those coming
from the ceiling with the supplied terminal block according to the wiring diagrams provided below:
HOW TO USE
4.
Turn on power and check operation of fan. The pull chain controls the fan as follows: One pull-high speed; two pulls-
medium speed; three pulls-low speed; four pulls “off”.
5.
If regulator speed controls being applied, the regulator controls the fan as follows; Turn control knob to
position“3”(high speed), then decrease as required in steps to position “1” (low speed).
6.
The slide switch controls “FORWARD” and “REVERSE”. Be sure turn off the power source before reverse the fan.
CARE AND CLEANING
Attention: before normal cleaning operations, turn the fan off, turn the fan lamp off (if present), and
disconnect from mains power by turning off the isolating switch (pos. 0/OFF).
•
For cleaning, use a soft, slightly damp cloth; do not use abrasive orcorrosive products. Be
careful not to damage the equipment, blades,electrical connections, or impair the hardware.
•
Do not immerse or soak any part of the fan in water or any other liquid;in the event that this
happens, first ensure the fan is disconnected from the mains power supply, and then wipe the
appliance off carefully,making sure that all electrical parts are perfectly dry: in case of
doubt,consult a qualified professional
•
It is important to keep the air vents of the motor free of dust and lint.