•
T
he use of any electrical appliance calls for the awareness of some basic rules, such as:
-
Do not touch the device with wet or damp hands or feet
-
Do not leave the appliance exposed to atmospheric agents.
•
N
ever attach the fan to a power point, but to the ceiling itself.
•
S
witch off the power before connecting or repairing the fan.
•
T
he electrical wiring must be in accordance with the local regulations.
•
T
he fan must be properly grounded to avoid the risk of electric shocks.
•
N
ever install the fan in a moist or wet room.
•
N
ever try to repair the fan . Never dismount it. In case of need refer to a qualified electrician only or to Authorized
Technical Service
•
I
n case of malfunctioning or damages always refer to Authorized Technical Service.
•
T
his product is compliant to LVD Directive 2014/35/CE, EMC 2014/30/CE, RohS II 2011/65/CE and ERP
2009/125/CE
INSTALLING THE FAN
1.
Attach the mounting plate to the ceiling: drill the holes,taking care not to damage any piping inside the wall (first
check if there are water or gas pipes etc... or electrical wires embedded in the wall); use expansion dowels and
screws with washers to attach the plate. Make sure it is firmly attached, then apply a weight to the plate 4 times
higher than that of the fan and check that the plate remains perfectly fixed to the base. (Refer to pic.1)
2.
Insert the down rod through the top cap and insert the electrical cables through the hollow shaft. The wires are
inserted from bottom to top.(Refer to pic.2)