ZEOS Meridian 800, Руководство пользователя

Страница: 61 / 80

61
Chapter 5 - Using SETUP
Ring on Resume
Use the Ring on Resume feature to determine whether the
system automatically wakes up from Suspend mode upon
receiving an incoming modem ring from a serial modem or a
PCMCIA modem.
Low Battery Suspend
Use this feature to automatically enter the suspend mode when
the battery charge is critically low. If you disable this feature,
normal battery low alarms will occur, but the system will not
enter suspend mode unless you push the suspend/resume button.
You can choose Enabled or Disabled.
Note: If you disable this feature and ignore low battery alarms, the system will shut
down when the battery is drained. Also remember that Suspend mode is
intended for short breaks only. For longer breaks, always turn your machine
completely off, so the battery can recharge.
HDD Timeout Value
Use the HDD Timeout Value feature to determine how much
time elapses before the hard drive automatically shuts off. The
next time an application accesses the hard disk, it switches back
on.
The hard disk timeout interval can be disabled or set to preset
values between 1 minute and 15 minutes.
Remaining Battery Level
Displays the level of usable battery with the horizontal bar when
the battery pack is installed in your system.
Note: A battery must fully charge within the system, or the remaining battery level may
not read accurately as battery power decreases.