CE4552
Instructions / Guarantee
English
Battery precautions
1. Do not use rechargeable batteries.
2. Use only alkaline AA batteries of the same or equivalent
type.
3. Insert batteries with the correct polarity.
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal
requirements. Do not dispose them by throwing away with
normal household rubbish.
6. Avoid short circuiting the contacts in the battery compart-
ment and battery terminals.
7. Remove batteries from the unit if it will not be used for a
long period of time.
8. Exhausted batteries should be removed from the battery
compartment to prevent over-discharge, which can cause
leakage and may cause damage to the clock.
Battery installation
1. Insert 2xAA (1.5V) batteries observing the correct polarity,
as shown on the diagram.
2. Replace battery cover.
Time setting
Turn the TIME SET knob on the back of the clock in the
direction of the arrow until correct time is shown. Only turn in
the direction of the arrow to avoid damaging the movement.
Alarm setting
Turn the ALARM SET knob on the back of the clock in the
direction of the arrow until the desired alarm time is shown.
Only turn in the direction of the arrow to avoid damaging the
movement.
Alarm function
To set the alarm, move the slider on the right side of the clock
upwards. The alarm is set when the green colour indicator is
visible. To unset the alarm, move the slider on the right side
of the clock downwards.
Snooze function
When the alarm is sounding, push the button at the top of
the clock and the SNOOZE/LIGHT function will be activated.
The alarm will be stopped and will sound again after ~5
minutes.
Backlight function
Anytime, push the button at the top of the clock and the
backlight function will be activated. The dial will be illuminat-
ed for 8 seconds.
Continuous backlight function
To activate the continuous backlight function, move the
slider on the back side of the clock to the ‘on’ position.
When the clock is placed in a dark environment, a subtle
backlight effect will automatically be activated to aid legibili-
ty. To disable the continuous backlight function, move the
slider on the back side of the clock to the ‘off’ position.
Note: If this feature is used continuously, the battery life will
be greatly reduced.
Guarantee
1 year guarantee against material and workmanship defects
(except battery). The guarantee is valid in those countries
where the clock is officially being sold.
Broken or cracked lens screens are not covered under the
guarantee.
For customer service please contact:
The Service Centre
Unit 1 Phoenix Park
Apsley Way
London
NW2 7LN
+44 (0)208 208 1833
WARNING!
This product is covered by the Waste Electrical
and Electronic Equipment (WEEE) directive. It should not be
discarded with normal household waste but taken to your
local collection centre for recycling.
This product conforms to the EMC requirements as per
council directive 2014/30/EU.
TIME SET
ALARM SET
ON
