Zenty ZT-118, Руководство пользователя, Страница: 23 / 33

(844) 200-1945 | sales@zenty.com Page 23 of 33 Copyright © Zenty AV
In the parameter configuration area, select the serial port number that the serial line connects to the
PC
Baud rate: 115200 (default)
Data location: 8.
Stop bit: 1
Check bit: no
Then can input commands in the command input area to control the local or remote receiver
Instructions:
1. All commands start from “ # ” , command head “ %c ” : “ d ” parameters, “ l ” lock,
“ s ” saves.
2. The “ _ ” in the commands cannot omit. Parameter: %d: 0 means ALL.
3. Command head & Parameter1 & Parameter2... need to add one “ SPACE ” .
The following table is only an example. Please refer to the list of instructions.