Zenty ZT-118, Руководство пользователя, Страница: 22 / 33

(844) 200-1945 | sales@zenty.com Page 22 of 33 Copyright © Zenty AV
Dual way IR using:
Step1: “ IR IN ” is for HDBaseT output, “ IR OUT ” is for input channel
Step2: “ IR IN ALL ” Controlled by all input IR; “ IR OUT ALL ” Controlled by all output IR.
Step3: HDBaseT receiver support connect with IR receiver to control the Matrix by remote
Step4: Matrix IR channel “ IR IN ALL ” support connect with IR-RX cable to control the Matrix by remote
Control software operation:
The serial control software is illustrated with SSCOM32 as an example.
Basic Settings:
Double-click the software in the installation package to run specifically (as shown in figure 1 below)
and install the RS232 software on the computer.
Enter the main interface of the software, as shown in the figure below.