8
7
6
Improperly installed ceiling sweep fans
can be dangerous and expensive to
repair and will void guarantee.
This fan is designed for indoor use only.
Do not mount in positions where fan is
subject to water or moisture.
The fan must be installed so that the
blades are greater than 2.1 metres
from floor.
All wiring must comply with the
requirements of Australian and New
Zealand Standard AS/NZ 3000.
The fan blades supplied for this fan are
matched to minimize wobble.
If installing more than one fan do not mix
blade sets.
Ceiling Fan
Assembly and Installation Instructions
Model No’s CSF5244 CSF5247
Note: This fan must be installed by a license electrical contractor.
TROUBLE SHOOTING CHECKLIST
Trouble
Problem Cause
Suggested Remedy
Fan will not start
a
Fuse or circuit breaker
blown
b
Loose power line
connections to the fan.
c
Reversing switch
(where applicable)
neither up or down.
a
Check main and branch
circuit fuses or circuit
breakers.
b
Check line wire
connections to fan.
c
Push switch either fully
up or down.
Fan wobbles
a
Fan blades not horizontal
to ceiling
b
Blade screws are loose
a
Measure from ceiling to tip
of blades, then rotate fan so
all 4 blades are checked for
equal height from ceiling.
(Note: adjustments may
be made by slight
pressure up or down
on blade holders).
Make sure all screws are
securely fastened.
Fan sounds noisy
a
Light kit glassware loose
or rattling
b
Incorrect bulb(s) being
used in light kit.
c
Loose fan blade screws
d
Ceiling fan not secured
against ceiling
e
Incorrect speed controller
a
Brass knob securing glass
should be finger tight.
b
Check suggested bulb(s)
in light kit
c
Re-tighten all screws
on fan blades but never
over-tighten
d
Re-tighten all screws
in the hanging bracket
or plate.
e
Change the controller
to the one supplied.
Mechanical Noise
a
Allow for at least 8 hours
settling-in period.
CPIN002258
Warranty
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product will be free of defects in materials
and workmanship for a period of 12 months from the date of purchase; provided the product is not used or installed other than for the
purpose, or in a manner not within the scope of the recommendations and limitations, specified by Arlec, is new and not damaged at the
time of purchase, has been properly installed by a licensed electrician or contractor who is licensed to install electrical products in the
place in which the product was installed and in accordance with Arlec’s installation instructions, has been maintained in accordance with
the recommendations specified by Arlec, has not been subjected to abuse, misuse, neglect or damage, has not been modified or repaired
without the approval of Arlec and has not been used for, or installed in premises which are used for, commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense, return the product or that part of the product which you believe
is defective in materials and workmanship, and provide proof of original purchase, your name, address and telephone number and a
certificate of installation or other document required by law for the installation of electrical products in the place in which the product was
installed issued by the licensed electrician or contractor who installed the product, to Arlec at the address below within 12 months from
the date of purchase. Please note that the Warranty does not cover removal or re-installation of the product or that part of the product
which you believe is defective.
Arlec will assess any claim you may make on the Warranty in the above manner and if, in Arlec’s reasonable opinion, the Warranty
applies, Arlec will at its own option and expense replace the product (or part of the product) with the same or similar product (or part of
the product) or repair the product (or part of the product) and return it to you or refund the price you paid for the product. Arlec will bear its
own expenses of doing those things, and you must bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]
A warranty claim will only be accepted if accompanied by the following:
1
A completed copy of this form.
2
Proof of purchase.
3
Proof of installation by a licenced electrical contractor.
Please retain all invoices and, if provided, electrical certificate as proof that a qualified
installer has performed this installation. The installer can assist you in competing this form.
Customer Details
Name
Address
Telephone
Mobile Phone
Email
Product Purchase Details
Date of Purchase
Model No
(as shown on product)
Electricians Details
Company/Business Name
Address
Telephone
Electrician’s Name
Registered Electrical Contractor No
WARRANTY CLAIM:
Ph:
(03) 9982-5111
Fax:
1300 360 650
Email:
Please send a copy of this record form, a copy of your purchase receipt and a copy of your certificate
of electrical compliance from a licenced electrician, plus your name, address and phone number.
Installation Record Form
CPIN002258
