17
11. Place gear nut on center bolt.
12. Tighten gear nut with cresent wrench.
13. Secure gear nut with clip and insert bolt.
14. Tighten gear nut clip bolt securing the
centerbolt gear nut.
Tool Calibration
If a repair replacement motor or drive plate is required, the pruners need to be recalibrated.
Calibration Steps
1) Remove the upper and lower blades.
2) Insert the battery.
3) Hold down the trigger and remain motionless. Press the POWER switch again.
4) The trigger remains motionless for more than 20 seconds.
5) Release the trigger when you hear the motor turning.
6) The electric motor rotates during calibration. When the motor stops turning the
calibration is complete.
Sharpening
This step is critical because it determines the trimming quality, life of the blade and battery life.
The harder it is to cut, the more power your ePruner uses.