15
Disassembly and Assembly Maintenance Steps
General maintenance, cleaning, lubrication and blade replacement requires some disassembly
and assembly of your ePruner.
The cover is fastened to the pruner by 4 screws. The center bolt is secured with an adjustable
gear nut which is locked into place by a gear nut clip. The gear nut clip is secured by a single
bolt.
With the removal of the of the cover, adjustment clip, gear nut, and center bolt you can access,
maintain, clean, lubricate and replacement of blades when necessary.
1) Loosen adjustment clip bolt with allen wrench.
2) Remove adjustment clip bolt and adjustment clip.
3) Loosen gear nut with cresent wrench.
4) Remove adjustment gear nut.
5) Unscrew 4 cover screws with allen wrench.
6) Remove cover and disassemble blade set.
7) Apply grease to recess in blade.
8) Apply grease to gear teeth and center bolt hole.
9) Assemble blade set, place cover and insert center bolt.
10) Tighten 4 cover screws with allen wrench.
11) Place gear nut on center bolt.
12) Tighten gear nut with allen wrench.
13) Secure gear nut with gear nut clip and insert gear nut clip bolt.
14) Tighten gear nut clip bolt.
1. Loosen adjustment clip bolt with allen
wrench.
2. Remove adjustment clip bolt and
adjustment clip.