22
5.2 Printer Function
1. Select the PC interface connected with bar code printer.
The default interface setting is
USB interface. If USB interface
is connected with printer, no
other settings need to be
changed in the interface field.
2.
Click the “Printer Function” button to setup.
3. The detail functions in the Printer Function Group are listed as below.
Function
Description
Calibrate Sensor
Calibrate the sensor specified in the Printer Setup
group media sensor field
Ethernet Setup
Setup the IP address, subnet mask, gateway for
the on board Ethernet
RTC Setup
Synchronize printer Real Time Clock with PC
Factory Default
Initialize the printer and restore the settings to
factory default. (Please refer section 5.3)
Reset Printer
Reboot printer
Print Test Page
Print a test page
Configuration Page
Print printer configuration (Please refer section
5.2)
Dump Text
To activate the printer dump mode.
Ignore AUTO.BAS
Ignore the downloaded AUTO.BAS program
Exit Line Mode
Exit line mode.
Password Setup
Set the password to protect the settings
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide at
1
2
Содержание 4D520P Series
Страница 1: ...i USER S MANUAL 4D520 4D520P Series DIRECT THERMAL BAR CODE PRINTER...
Страница 14: ...8 2 2 3 Rear View 4D520 model 4D520P model 1 USB interface 2 Power jack 3 Ethernet interface 1 2 1 2 3...
Страница 23: ...17 Numbers of download files Total available memory space Print head check pattern...
