background image

GB-2

HTZ7500 / CHTZ6000 / CHTZ7500

DESIGNATION

Hedge trimmers

MANUFACTURER

Husqvarna Zenoah Co., Ltd.

MODELS

HTZ7500
CHTZ6000
CHTZ7500

SERIAL NUMBERS DATING

2010 and onwards

 (The year is cleary stated on the rating plate, 
   follwed by the serial number)

This declaration conform with :

DIRECTIVE

2006/42/EC

   (The following standards have been applied: ISO 12100-1,-2, FprEN 15503: 2009)

DIRECTIVE

2004/108/EC

   (The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12: 2005))

DIRECTIVE

2000/14/EC

    conformity assessment procedure followed ANNEX V
   (The following standards have been applied: ISO 11094)

DIRECTIVE

2002/88/EC

EN774 : 1996

Date :                

29 December 2009

Signature :

Kiyoshi Honda
General Manager, Development Center

Authorised representative :

Husqvarna AB
SE-561 82 Huskvarna, Sweden

Person authorised to compile the technical file :

Bo R Jonsson
SE-561 82 Huskvarna, Sweden

EC DECLARATION OF CONFORMITY

(Applies to Europe only)

The undersigned manufacturer,

Husqvarna Zenoah Co.,Ltd.,

1-9, Minamidai, Kawagoe, Saitama, Japan,

declares under sole responsibility that the following products referred to in this 
declaration conform with the requirement of the following COUNCIL’S DIRECTIVE.

The products referred to are :

Содержание HTZ7500

















Отзывы: