Zenoah HBZ2600, Руководство оператора

Страница: 38 / 52

38
11. Optional vacuum kit usage
English
Attach the adequate accessories, respectively for
blower operation and dust-collecting operation.
• Use the gloves during operation.
• In adjustment of the blower/dust collector or in other
types of operation, be sure to stop the engine and
detach the spark plug cap.
• Never start operation unless this machine is
completely assembled.
■
MOUNTING THE DUST-COLLECTING KIT
1) Installing Support Handle (OPT1)
• This handle is supplied with the blower.
• Fit the holes of volute and handle, tighten the
screws.
• Be sure to tighten the screws straightly.
(1) Support Handle
(2) Holes
(3) Screws
2) (OPT2)
1. Fit the extension pipe (1) groove with main unit
port projection, turn to mount the pipe to the main
unit.
2. Tighten the clamp screw (2) securely.
3) Installing Vacuum Pipe (nozzle) (OPT3,4)
1. Loosen the screw (3), and open the suction port
cover.
2. Align the (5) indicated on the vacuum pipe
(4) with the indicated on the blower. Then
insert the vacuum pipe (4) into the blower.
3. Turn the vacuum pipe (4) until the (5) is
aligned with the indicated on the blower to
lock the vacuum pipe.
Hold the bottom of the vacuum pipe when turning the
vacuum pipe to install or remove it.
IMPORTANT
NOTE
OPT1
OPT3
OPT2
OPT4