background image

3. SAFETY PRECAUTIONS

KICKBACK SAFETY PRECAUTIONS

A  dangerous reaction may occur
when the spinning blade contacts
a solid object in the critical area.
It is called Kick back. As a result,
the operator can lose control of
the unit which can cause serious
or fatal injury.
Avoid kickback, observe the
safety precautions below strictly.

1. Keep the cutting blades clear of

fances, posts, wires, and rocks to
prevent kickback and damage to
the blades.

2. When using your hedge-trimmer,

do not grip other parts except the
handles.

3. When using your hedge-trimmer,

never take your eyes off. If you
need to, place the throttle into the
idling position.

4. When using your hedge-trimmer,

do not let the unit get closer to
your feet nor raise the unit above
your waist. 

NOTES ON TRANSPORTATION

a. Make sure the appropriate blade

cover is in place.

b. When transporting by car, fix the

unit firmly using a rope. Do not
transport by  bicycle or motorbike
because it is dangerous.

c. Never transport the hedge-

trimmer over rough roads over
long distances without first
removing all fuel from the fuel
tank, as doing so might cause fuel
to leak from the tank.

OPERATION SAFETY PRECAUTIONS

a. Grip the handles of the hedge-

trimmer firmly with both hands. If
you suspend the work, place the
throttle into the idling position.

b. Always be sure to maintain a

steady, even posture while
working.

c. Maintain the speed of the engine

at the level required to perform
cutting work, and never raise the
speed of the engine above the
level necessary.

English

9

Содержание EHT603D





















Отзывы: