GB-3
EBZ7500
G
B
2. Specification
3. Warning labels on the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
4. Symbols on
the machine
MODEL
EBZ7500
Dimensions (LxWxH)**
mm
354x492x499
Dry weight*
kg
10.5
Fuel tank capacity
liter
2.1
Engine type
Air-cooled
2-cycle gasoline engine
Displacement
cm
3
65.6
Air filter
2 stage fresh flow filter system
Carburetor
Diaphragm, rotary valve type
Ignition system
C.D.I.
Spark plug
NGK CMR7H (Noise-proof)
Muffler
Spark arrester equipped
Operating engine speed
rpm
2000 to 7250
Fuel consumption
liter/h
1.85
Air volume* (ANSI B175.2)
cu.m/min
21.8
Max. Air velocity* (ANSI B175.2)
m/sec
105.6
* with standard pipe **without pipe
Specifications are subject to change without notice.
(1) Read owner’s manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly could result in accidents
causingserious injury or death. Read this manual carefully and
practice using the blower until you are fully acquainted with
all operations and have learned to use it correctly.
(4) Severing of fingers or hand by fan blade
Do not open or remove safety guards or nets while engine is
running.
(5) Thrown or blown object
Stay a safe distance from the machine.
(6) Hot surface
Avoid contact the hot surface during and immediately opera-
tion.
Keep all children, bystanders and helpers 15 meters away from the machine.
Never modify your machine.
We won’t warrant the machine, if you use
the remodeled pruner or if you don’t observe
the proper usage written in the manual.
If warning label peels off or becomes soiled
and impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: INTAKE CUP
The direction to open the choke
Position: INTAKE CUP
01-EBZ7500_GB3lan_212＿一.indd 3
12.12.19 1:51:19 PM
