Zenoah EBZ5100 Скачать руководство пользователя страница 7

GB-7

EBZ5100

G

B

 WARNING

The temperature of the machine
may increase after stopping the
engine. Especially never forget to
cool down the engine before refu-
eling the machine.

10. In an emergency, pull up the

lower portion of both strap buck-
les to loosen the straps. Move
yourself away from the unit.

11. After using blowers and other

equipment, CLEAN UP! Dispose
of debris in trash receptacles.

MAINTENANCE

1. In order to maintain your product

in proper working order, perform
the maintenance and checking
operations described in the
manual at regular intervals.

2. Always be sure to turn off the en-

gine and disconnect the spark
plug before performing any main-
tenance or checking procedures.

 WARNING

The metallic parts and engine
cover reach high temperatures
immediately after stopping the
engine.

3. Examine the blower at intervals

for loose fasteners and rusted or
damaged parts. 

Use special

care around the fuel line, the
muffler, and the ignition wiring.

4. All engine service except for

those described in this manual
should be performed by compe-
tent service personnel. Improper
service to the blower fan and muf-
fler could cause a hazardous fail-
ure.

5. When replacing the any other

part, or any lubricant, always be
sure to use only ZENOAH prod-
ucts or products which have been
certified by ZENOAH for use with
the ZENOAH product.

6. In the event that any part must be

replaced or any maintenance or
repair work not described in this
manual must be performed,
please contact a representative
from the store nearest ZENOAH
authorized servicing dealer for

assistance.

7. Do not use any accessory or at-

tachment other than those bear-
ing the ZENOAH mark and rec-
ommended for the unit.

8. Under no circumstances should

you ever take apart the product
or alter it in any way. Doing so
might result in the product be-
coming damaged during opera-
tion or the product becoming un-
able to operate properly.

TRANSPORTATION

 • Drain the fuel from the fuel tank

before transporting or storing the
blower.

 • Secure the unit carefully to pre-

vent movement when it is trans-
ported.

 • A unit that receives a strong

shock during transport and un-
loading may malfunction.

STORAGE

 • When storing the blower, choose

a space indoors free from mois-
ture and out of the reach of chil-
dren.

DISPOSAL

 • When you dispose of the ma-

chine, do not disassemble the
machine .

 • When disposing your machine,

fuel or oil for the machine, be sure
to allow your local regulations

Содержание EBZ5100















Отзывы: