manualshive.com logo in svg

Zenoah BK3402FL, Руководство пользователя

Поделиться
Скачать
Zenoah BK3402FL Скачать руководство пользователя страница 12

GB-12

BK3402FL / BK3402FL-EZ / BK3402FLJ / BK3402FLJ-EZ / BK4302FL / BK4302FL-EZ / BK4302FLJ / BK4302FLJ-EZ

6. Set up

3.  Remount the blade rest plate as it was.
4.  Place the blade on the blade rest plate with its hole 

fitted to the protrusion of the plate and remount the 
outer holder and the bolt cover.

5.  Lock the blade rest plate with the L-shaped wrench 

and tighten the blade mounting nut securely.

(3)

(1)

(4)

(5)

(6)

(2)

(7)

(8)

(1) Blade mounting 

nut

(2) Blade
(3) Socket wrench
(4) Bolt cover
(5) Outer holder
(6) Blade rest plate
(7) Cover preventing 

grass from 
getting caut up

(8) L-shaped wrench

[Tightening torque] 
14.7 to 19.6 N

•

m (150 to 200 kgf

•

cm)

IMPORTANT

Look at the blade from above, and make sure that the 
direction in which the blade is mounted is correct.

(1) Rotating direction

Installing the nylon cutter (option)

IMPORTANT

Since the resistance of the nylon cutter is larger than 
that of the metal cutter, wrong operation of the nylon 
cutter will cause the clutch to overheat, deform and be 
damaged. When using the nylon cutter, carefully note 
the following.

•  Use ZENOAH’s genuine nylon cutter. When using a 

commercially-available nylon cutter, make sure that 
it is no longer than 10 cm in external shape.

•  Make sure that the length of the nylon cord is 17 cm 

or shorter.

•  Keep the engine rotating at high speed while work-

ing.

1.  Install the blade rest plate and the outer holder on 

the gear shaft correctly, and stop their whirl with the 
accessory L-shaped wrench.

2.  Screw  the  nylon  cutter  into  the  gear  shaft,  and 

tighten it firmly with hand.

(1) Nylon cutter
(2) L-shaped wrench
(3) Gear case
(4) Blade rest plate
(5) Outer holder
(6) Nylon cord

NOTE

The nut and bolt cover for mounting the blade are re-
quired when using the metal blade. Keep them care-
fully so as not to lose them.

01-BK3402･4302_GB_208＿三.indd   12

12.9.14   11:08:24 AM

Содержание BK3402FL























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды