8
Charge the battery
Warning!
Use only batteries and chargers supplied with
or approved by Zennox for this B800. Use of others will
invalidate approvals or warranty and may be dangerous.
Do not charge the battery with the back cover removed.
1.
Connect the charger lead firmly into the socket on the
side of the handset.
2.
Plug the charger into an AC mains socket. The battery
indicator bar scrolls and “
Charging…
” is displayed.
3.
Charging the battery may take up to 15 hours.
4.
If
No charging
is displayed, disconnect the charger,
and retry. If charging still fails, contact the helpline.
5.
The battery is fully charged when the bar stops scrolling.
Disconnect the charger from the phone and the AC
outlet.
Connect a compatible headset (Optional)
You can use the B800 GSM with a headset (not supplied).
The connector must be a 2.5mm 3-pole jack plug that
inserts in the Power/Headset socket on the left side of the
handset.
When connecting a headset, including those approved by
Zennox for use with this device, pay special attention to
volume levels. Read its user guide for detailed safety
instructions. Do not connect incompatible products.
When correctly inserted the
headset icon will show on
the handset display.
