Zennio Tecla 55, Руководство пользователя

Страница: 13 / 20

Tecla 55
https://www.zennio.com Technical Support: https://support.zennio.com
13
ANNEX I. COMMUNICATION OBJECTS
“
Functional range
” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have a
particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
Note: The objects shown in this table are from model Tecla 55 X6. Please note that certain objects will not be available in models with less push buttons.
Number Size I/O Flags Data type (DPT) Functional Range Name Function
1 1 Bit C - - T - DPT_Trigger 0/1 [Heartbeat] Object to Send '1' Sending of '1' Periodically
2 1 Bit C - - T - DPT_Trigger 0/1 [Heartbeat] Device Recovery Send 0
3 1 Bit C - - T - DPT_Trigger 0/1 [Heartbeat] Device Recovery Send 1
4 1 Byte I C - W - - DPT_SceneNumber 0 - 63 [General] Scene: Receive 0 - 63 (Run Scene 1-64)
5 1 Byte C - - T - DPT_SceneControl 0-63; 128-191 [General] Scene: Send
0 - 63/128 - 191 (Run/Save Scene
1-64)
6
1 Bit I C - W - - DPT_Enable 0/1 [General] Touch Locking 0 = Unlock; 1 = Lock
1 Bit I C - W - - DPT_Enable 0/1 [General] Touch Locking 0 = Lock; 1 = Unlock
7 1 Bit C - - T - DPT_Switch 0/1 [General] Welcome Back Object Switch Object Sent on Wake Up
8
1 Bit I C - W - - DPT_Enable 0/1
[General] Sounds - Disabling
Button Sound
0 = Disable Sound; 1 = Enable
Sound
1 Bit I C - W - - DPT_Enable 0/1
[General] Sounds - Disabling
Button Sound
0 = Enable Sound; 1 = Disable
Sound
9
1 Bit I C - W - - DPT_Ack 0/1 [General] Sounds - Doorbell
1 = Play a Doorbell Sound; 0 =
Nothing
1 Bit I C - W - - DPT_Ack 0/1 [General] Sounds - Doorbell
0 = Play a Doorbell Sound; 1 =
Nothing
10
1 Bit I C - W - - DPT_Alarm 0/1 [General] Sounds - Alarm
1 = Play Alarm Intermittent
Sounds; 0 = Stop Alarm Sounds
1 Bit I C - W - - DPT_Alarm 0/1 [General] Sounds - Alarm
0 = Play Alarm Intermittent
Sounds; 1 = Stop Alarm Sounds
11, 12, 13, 14, 15 1 Bit I C - W - - DPT_Switch 0/1
[General] Welcome Back Object -
Additional Condition
Additional Condition Object x
16 1 Bit I C - W - - DPT_Enable 0/1 [General] Proximity Sensor 0 = Disable; 1 = Enable
17 1 Bit I C - W - - DPT_Start 0/1
[General] External Proximity
Detection
1 = Detection
18 1 Bit C - - T - DPT_Start 0/1 [General] Proximity Detection Send 1 when Proximity is Detected
19
1 Bit C - - T - DPT_Bool 0/1 [General] Luminosity (1-Bit)
0 = Over Threshold; 1 = Under
Threshold
1 Bit C - - T - DPT_Bool 0/1 [General] Luminosity (1-Bit)
0 = Under Threshold; 1 = Over
Threshold