Securel v2
Technical Support:
9
4
SECUREL V2 STATUS
The different performances that Securel v2 will have facing several possible situations
during its operation are explained below.
4.1
DEFAULT STATUS
In the factory default state, Securel v2 is in
pairing mode
. This way, Securel v2 will
automatically pair with the first IWAC connected to it.
4.2
STATUS AFTER PROGRAMMING
After programming:
If Securel v2 was paired:
keeps the pairing
and the relay
will not carry out
any action on the lock
until a first order is received from the IWAC.
If Securel v2 was not paired: remains in
pairing mode
.
4.3
STATUS AFTER BUS FAILURE
A KNX bus power failure
does not imply any change in the device status because
Securel v2 has external power supply
. It will continue to operate normally (although,
logically, it will not send the Heartbeat object to the bus).
4.4
STATUS AFTER POWER FAILURE
When a power failure occurs,
the electric strike is no longer powered; therefore it
remains closed
.
When recovering from the power failure, Securel v2 returns to idle state and therefore,
the lock will be closed.
On the other hand, after power failure,
Securel v2 keeps the previous pairing with
the IWAC
.