Zennio KLIC-SG vT, Руководство пользователя

Страница: 33 / 38

KLIC-SG vT
https://www.zennio.com Technical Support: https://support.zennio.com
33
35 1 Bit O C R - T - DPT_Alarm 0/1 [AC] AC Unit Error: Active Error AC Unit Error
36 14 Bytes O C R - T - DPT_String_ASCII [AC] AC Unit Error: Error Code See AC Unit Manual
37 1 Bit I C - W - - DPT_Enable 0/1 [AC] Remote Control Restriction
0 = Disable Remote Control; 1 =
Enable Remote Control
38 1 Bit O C R - T - DPT_Enable 0/1 [AC] Remote Control Restriction (Status)
0 = Remote Control Disabled; 1 =
Remote Control Enabled
39 1 Bit I C - W - - DPT_Trigger 0/1 [AC] Filter: Reset Filter Status Reset
40 1 Bit O C R - T - DPT_Enable 0/1 [AC] Filter (Status) 0 = No Alarm; 1 = Alarm
41 1 Bit I C - W - - DPT_Switch 0/1 [AC] Wind-Free Mode 0 = Deactivate; 1 = Activate
42 1 Bit O C R - T - DPT_Switch 0/1 [AC] Wind-Free Mode (Status) 0 = Deactivated; 1 = Activated
43 1 Bit I C - W - - DPT_Switch 0/1 [AC] Quiet Mode 0 = Deactivate; 1 = Activate
44 1 Bit O C R - T - DPT_Switch 0/1 [AC] Quiet Mode (Status) 0 = Deactivated; 1 = Activated
45 1 Bit I C - W - - DPT_Switch 0/1 [AC] Ionizer 0 = Deactivate; 1 = Activate
46 1 Bit O C R - T - DPT_Switch 0/1 [AC] Ionizer (Status) 0 = Deactivated; 1 = Activated
63, 67 2 Bytes O C R - T - DPT_Value_Temp -273.00º - 670433.28º [Ix] Current Temperature Temperature Sensor Value
64, 68 1 Bit O C R - T - DPT_Alarm 0/1 [Ix] Overcooling 0 = No Alarm; 1 = Alarm
65, 69 1 Bit O C R - T - DPT_Alarm 0/1 [Ix] Overheating 0 = No Alarm; 1 = Alarm
66, 70 1 Bit O C R - T - DPT_Alarm 0/1 [Ix] Probe Error 0 = No Alarm; 1 = Alarm
71, 77 1 Bit I C - W - - DPT_Enable 0/1 [Ix] Input Lock 0 = Unlock; 1 = Lock
72, 78
1 Bit C - - T - DPT_Switch 0/1 [Ix] [Short Press] 0 Sending of 0
1 Bit C - - T - DPT_Switch 0/1 [Ix] [Short Press] 1 Sending of 1
1 Bit I C - W T - DPT_Switch 0/1 [Ix] [Short Press] 0/1 Switching Switching 0/1
1 Bit C - - T - DPT_UpDown 0/1 [Ix] [Short Press] Move Up Shutter Sending of 0 (Up)
1 Bit C - - T - DPT_UpDown 0/1 [Ix] [Short Press] Move Down Shutter Sending of 1 (Down)
1 Bit C - - T - DPT_UpDown 0/1
[Ix] [Short Press] Move Up/Down
Shutter
Switching 0/1 (Up/Down)
1 Bit C - - T - DPT_Step 0/1 [Ix] [Short Press] Stop/Step Up Shutter Sending of 0 (Stop/Step Up)
1 Bit C - - T - DPT_Step 0/1
[Ix] [Short Press] Stop/Step Down
Shutter
Sending of 1 (Stop/Step Down)
1 Bit C - - T - DPT_Step 0/1
[Ix] [Short Press] Stop/Step Shutter
(Switched) Switching of 0/1 (Stop/Step
Up/Down)
4 Bit C - - T - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
...
0x7 (Dec. by 1%)
0x8 (Stop)
0xD (Inc. by 100%)
...
0xF (Inc. by 1%)
[Ix] [Short Press] Brighter Increase Brightness
4 Bit C - - T - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
[Ix] [Short Press] Darker Decrease Brightness