KLIC-FJ vT
Technical Support:
21
2.4.3
FLAPS
The Flaps function allows sending the A/C unit orders to switch the position of the flaps
(or vanes) that direct the air flow outwards. To that end, KLIC-FJ vT provides both a
percentage
control and a
binary
control.
In addition, KLIC-FJ vT allows activating the
swing function
(so the flaps oscillate
continuously for better distribution of the airflow), in case of being available in the unit.
Referring to the user manual of the A/C unit is advisable prior to setting up these options
ETS PARAMETRISATION
After enabling this function, the menu on the left will show a new tab named Flaps,
containing the following parameters:
Figure 17. A/C Gateway. Flaps.
This section allows configuring the availability of horizontal and vertical flaps, according
to the characteristics of the A/C unit. The next options can be set for each type of flaps:
Flaps control type
: allows selecting the object type for controlling the flaps:
