Zennio KLIC-FJ vT, Руководство пользователя

Страница: 20 / 35

KLIC-FJ vT
https://www.zennio.com/ Technical Support: https://support.zennio.com
20
Control (Status) " 1-Byte objects, which allow setting and reading the fan speed,
respectively. The following tables show the percentage values that correspond to
each of the available fan speeds:
➢ “Three levels (+ Automatic)”:
Control Values Status Value Level Sent to the Unit
0% 0% Automatic
1-33% 33% 1 (minimum)
34-66% 66% 2
67-100% 100% 3 (maximum)
Table 1. Fan speed (three levels)
➢ “Four levels (+ Automatic)”:
Control Values Status Values Level Sent to the
Unit
0% 0% Automatic
1-25% 25% 1 (minimum)
26-50% 50% 2
51-75% 75% 3
76-100% 100% 4 (maximum)
Table 2. Fan speed (four levels).
Individual Object for Automatic Speed
: enables the “
[AC] Speed: Automatic
”
and “
[AC] Speed: Automatic (Status)
” 1-Bit objects, which will let
activating/deactivating the automatic mode or reading the current status,
respectively.
➢
Automatic Speed Object Polarity : sets the polarity of the above objects:
“0 = Automatic On; 1 = Automatic Off” or “0 = Automatic Off; 1 = Automatic
On
”.
Note : Due to intrinsic Fujitsu restrictions, if dry mode is enabled, the unit will always
stablish automatic fan speed.