DIMinBOX 2CH
DIMinBOX 2CH. Two channel universal DIMMING actuator for lighting control
ZDI-DB2C
Technical Documentation
© Zennio Avance y Tecnología S.L. Draft Edition Further information
Page
2
/
4
Technical Documentation
SUPPORTED LOADS
R= Resistive
L= Inductive
C= Capacitive
CFL = Dimmable Compact Fluorescent Lamps
LED = Dimmable LED lamps
LOAD MIXING
For mixed resistive (R) with inductive (L) loads, do not exceed a 50% share for the
resistive load.
For mixed resistive (R) with capacitive (C) loads, do not exceed a 50% share for
the resistive load.
NEVER connect capacitive loads and electronic transformers with inductive
loads in the same channel.
Do not mix in the same channel CFL or LED lamps with R L C loads.
It is not advisable to mix different models of CFL lamps, LED lamps or transformers
in the same channel since correct functioning can be affected.
OVERHEATING PROTECTION
When the ambient temperature is too high the universal
dimmer actuator will regulate itself, at a maximum of 20%.
Once the ambient temperature decreases, the dimmer will
resume normal operation. Refer to user manual.
INPUT SPECIFICATIONS
Any combination of the next
accessories
is allowed in the inputs
:
INPUTS CONNECTIONS
CONCEPT
DESCRIPTION
Number of inputs per common
2
Input voltage
+3.3V DC for the common
Input current
1.0mA @ 3.3V DC (each input)
Input impedance
Aprox. 3.3kΩ
Switching type
Dry voltage contacts between input and common
Connection method
Cable screw terminal
Max. cable length
30 m.
NTC probe length
1.5 m.
NTC accuracy (@ 25ºC)
0.5ºC
Temperature measure resolution
0.1ºC
Cable cross-section
0,15 mm² to 1,5 mm²
Response time
Max 10ms.
Temperature
probe
references:
ZN1AC-NTC68E
ZN1AC-NTC68F
ZN1AC-NTC68S
Up to two motion sensors
can be plugged into the
same DIMinBOX 2CH
input (parallel wiring)
Motion sensor cable
screw terminal.
Motion sensor reference:
ZN1IO-DETEC-P
(1)
Temperature Probe
Motion Sensor
Switch/Sensor/
Push Button
(1) The micro switch number 2 in the ZN1IO-DETEC-P
must be in ON position
(3.3V in common terminal) to work properly.
DRAFT
EDITION
