Zennio AudioInRoom, Руководство пользователя

Страница: 12 / 26

AudioInRoom
https://www.zennio.com Technical Support: https://support.zennio.com
12
2. CONFIGURATION
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering
Parameters tab of the device.
2.1 GENERAL
From this screen the two main functions of AudioInRoom, Heartbeat and Bluetooth
Module , can be enabled.
ETS PARAMETERISATION
The configurable parameters on the General screen are the following:
Figure 5. General Configuration.
Heartbeat (Periodic Alive Notification) [ disabled /enabled ]
1
: incorporates a
one-
bit object to the project (“
[Heartbeat] Object to Sen
d ‘1’ ”) that will be
sent periodically with a value of “1” to notify that the device is still working (still
alive ).
Figure 6. Heartbeat (Periodic Alive Notification).
Note : The first sending after download or bus failure takes place with a delay
of up to 255 seconds, according to the individual address, to prevent bus
overload. The following sendings match the period set .
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[ default /rest of options ].