EN
HOW TO USE
• Place the massager on a flat surface.
• Plug the adaptor output plug (1) into the foot massager
power socket.
• Plug the power line connector (2) into the adaptor.
• Plug the power plug (3) into the socket.
• Sit on a chair and put your feet Into the massager.
• Press the ”Power” button to start.
• Press the ”Power” button again to stop the massage.
• Unplug the power line plug from the power socket.
FUNCTIONS
Anion button
Press this button to start the anion function that will neutralise
bad odour. The indicator light will light up. Press this button a
second time to stop the function.
Heating button
Press this button to start the heating function, the indicator light
will light up. Press this button a second time to stop the heat
function.
Intensity button
Press this button during a massage to shift between three
intensity levels: middle, weak and strong. Middle level is
default and the indicator light is red. Press the button to change
to weak level (indicator light is blue); press again to change to
strong level (indicator light is both red and blue).
Mode button
With the massager turned on, press this button to alternate
between three massage modes. Default is mode 1, indicator
light is red; press the button to change to mode 2 (blue light);
press again to change to mode 3 (light is both red and blue
(default is mode 1).
Power button
When the power supply is connected, press this button to start
the foot massager. The indicator lights will light up. Press this
button a second time to turn the massager off (the automatic
timer will end the massage after 15 minutes).
Power
socket
Anion button
Heating button
Intensity button
Mode button
Power button
Indicator light
Power plug
Power line
connector
Adaptor
Adaptor
output
plug
CONTROLLER
