Zenith ZLD15A1, Руководство по эксплуатации и гарантия

Страница: 14 / 48

206-3652
Connecting antenna
14
* To get better picture quality, adjust the direction of antenna.
●
In case of wall antenna socket in apartment houses, connect the antenna cable as shown below.
( Use the correct type of antenna cable to the type of wall antenna socket.)
DC 12V
ANT. IN COMPONENT INPUT
B
wall connecting port Apartments
antenna input port
bronze wire
Turn clock arise to
tighten.
antenna
converter
300
Ω
flat cable
75
Ω
round cable
●
This type of antenna is usually used at common private houses.
DC 12V
ANT. IN COMPONENT INPUT
B
DC 12V
ANT. IN COMPONENT INPUT
B
UHF
antenna
VHF antenna
antenna input port
bronze wire
Turn clock arise to
tighten.
antenna
converter
300
Ω
flat cable
75
Ω
round cable
* In case of 75
Ω
round cable, insert the bronze wire and then tighten the connecting nut.
And in case of 300
Ω
flat cable, connect the twisted wire to the antenna converter and
then connect the converter to the antenna input port.
* When using 75
Ω
round cable, do not bend bronze. It may cause poor picture quality.
* In poor signal area, you can get better
picture quality if you install the anten-
na like the figure as shown right.
* If an antenna is divided to two TV
sets, use “signal divider” for connect-
ing.
signal
amplifier
UHF
VHF
Private house
Connecting to wall antenna socket
Connecting to wall antenna socket
Connecting to outdoor antenna
Connecting to outdoor antenna