Zenith XBV322, Инструкция по установке и эксплуатации

Страница: 22 / 40

22
Tape Operation (Continued)
Normal Recording
Preparation:
Turn on the power of both the DVD+VCR and TV.
Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
11
Insert a video cassette with the safety tab intact.
2 2
Select the desired channel by using v v / V V .
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the
LINE1 or LINE2 by pressing
INPUT .
3 3
Set the desired recording speed (SP or SLP)
with the SP/SLP button.
This DVD+VCR is not designed to record in LP mode.
4 4
Set the MTS mode as desired (See page 15, 25).
5 5
Press REC/ITR ( z z ) once.
Recording will start. (The REC indicator will light in
the display window.)
REC indicator appears only when the Output Source is
set to VCR.
If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
6 6
Press STOP ( x x ) to stop recording.
If the tape reaches the end before STOP (
x
) is pressed,
the DVD+VCR will automatically stop, rewind, eject the
tape and turn itself off.
To pause recording
1 Press PAUSE/STEP ( X ) to pause the tape during
recording.
The REC indicator will flash in the display window.
2 When you want to continue recording, press
PAUSE/STEP (
X ) or press REC/ITR ( z z ).
After 5 minutes in pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
To record one TV program while
watching another
1 Use TV/VCR to select the TV mode during recording.
The TV indicator appears.
2 Using the TV, select the channel to be viewed.
ips
Always use PAUSE/STEP (
X
) for best results when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP (
X
) to put the unit in pause mode. Then select
the desired channel on the DVD+VCR, and press
PAUSE/STEP (
X
) again to resume recording.
Timer Recording
This DVD+VCR can be programmed to record up to 8
programs within a period of 1 year. For unattended
recording, the timer needs to know the channels to be
recorded and the starting and ending times.
Preparation:
Turn on the power of both the DVD+VCR and the TV.
Be sure the TV is set to the DVD+VCR output channel (3 or 4).
Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
11
Press MENU and the MAIN menu will appear.
2 2
Use v v / V V to choose the PROGRAM menu.
3 3
Press SELECT/ENTER to go to the PROGRAM
menu.
The PROGRAM menu will appear.
If all 8 programs have been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
4 4
Use b b / B B to choose the PROGRAM No. (1-8).
5 5
Use V V to choose the MONTH option.
Use b b / B B to choose the desired month.
6 6
Use V V to choose the DAY option.
Use b b / B B to choose the desired day.
77
Use V V to choose the START option.
Use
b b
/
B B
to choose the desired start time.
8 8
Use V V to choose the STOP option.
Use b b / B B to choose the desired stop time.
9 9
Use
V V
to choose the CHANNEL option.
Use b b / B B to choose the desired channel
(Channel, LINE1 or LINE2).
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD+VCR (page 11),
using a cable box converter, you must set the channel in
this step to match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box instead of
with the DVD+VCR.
If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
Make sure a tape is in the DVD+VCR and the safety tab is
in place or the tape will be automatically ejected.
Things to know before starting